home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.20000824-20010305 / 000345_news@columbia.edu _Thu Feb 22 15:16:28 2001.msg < prev    next >
Internet Message Format  |  2020-01-01  |  2KB

  1. Return-Path: <news@columbia.edu>
  2. Received: from watsun.cc.columbia.edu (watsun.cc.columbia.edu [128.59.39.2])
  3.     by monire.cc.columbia.edu (8.9.3/8.9.3) with ESMTP id PAA05968
  4.     for <kermit.misc@cpunix.cc.columbia.edu>; Thu, 22 Feb 2001 15:16:28 -0500 (EST)
  5. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.59.30])
  6.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id PAA22747
  7.     for <kermit.misc@watsun.cc.columbia.edu>; Thu, 22 Feb 2001 15:16:27 -0500 (EST)
  8. Received: (from news@localhost)
  9.     by newsmaster.cc.columbia.edu (8.9.3/8.9.3) id OAA07125
  10.     for kermit.misc@watsun.cc.columbia.edu; Thu, 22 Feb 2001 14:56:56 -0500 (EST)
  11. X-Authentication-Warning: newsmaster.cc.columbia.edu: news set sender to <news> using -f
  12. From: fdc@columbia.edu (Frank da Cruz)
  13. Subject: Re: connecting to serial port
  14. Date: 22 Feb 2001 14:56:51 -0500
  15. Organization: Columbia University
  16. Message-ID: <973qu3$ino@watsun.cc.columbia.edu>
  17. To: kermit.misc@columbia.edu
  18.  
  19. In article <20010222145025.00526.00000169@ng-ft1.aol.com>,
  20. ABSOLUTEOKC <absoluteokc@aol.com> wrote:
  21. : I am having difficulty because I am trying to connect a piece of medical
  22. : equipment, PLV 102 with my computer. We recieved Kermit 95 some time ago but
  23. : have not yet used it. I really don't know where to start. I am using the
  24. : Dialer and tried to add a connection. The item doesn't actually connect with
  25. : the machine. Is there any help you can give me? This is for calibrating the
  26. : PLV 102. Currently our operating system is Win 98.
  27. :
  28. So it's a direct serial-cable connection?  So you'll have to fill in all
  29. the blanks appropriately: com port, modem type is "direct", the appropriate
  30. speed and parity, etc.  Also you'll need the appropriate kind of cable,
  31. probably a null-modem cable, with the necessary complement of wires and
  32. jumpers.  But we don't know what a PLV 102 is so you'll need to read its
  33. interfacing instructions for guidance.
  34.  
  35. Once you have filled in all the blanks in the Dialer, you can highlight
  36. the entry and click on CONNECT.  If it seems to start up and then go away
  37. again immediately, it probably means your cable is not wired correcly.
  38. In which case you can try going to the Serial page and unchecking Carrier
  39. Detection.
  40.  
  41. The documentation is full of chapters explaining all this stuff.
  42.  
  43. - Frank